Construction Of Bridges

The process of construction is very complicated. But, the construction of bridges can be even more complicated. Because of all the technology enhancements the techniques of building and construction have changed. This has made the process of construction faster. Bridge construction needs a lot of man power and it also requires individuals who poses different forms of skills. For instance, you might need a Civil Engineers, Electrical Engineers, Mechanical Engineers, and Computer Engineers etc. during the process of construction. During the initial stages the architects will come up with the design. It’s important to clearly analyze the location of the bridge and come up with a plan accordingly. Only once the plan is finalized should you move towards constructing.
Once the design is complete the foundation work needs to take place. It’s important to start off with a geotechnical investigation before you officially begin construction. This will give you a thorough analysis of the location and it would help you analyze the entire situation accordingly. Once you get the go ahead from the geo technical team you could begin construction. Since a huge part of the bridge would be situated underwater you might want to make sure that the right professionals are hired. For safety purposes you might also want to install the necessary dividing systems. After the underwater construction is complete, you could shift your focus towards the other aspects. When it comes to the making of metal pillars you could look into structural fabrication.
Structural steel fabrication is an aspect which needs to be seriously looked at. Once the pillars are completed the latter part of the construction could take place. You might need to get all the necessary machinery and equipment on sight so that there won’t be a halt during construction. The most common machines which will be present on site would be Asphalt mixers and Bulldozers. After the construction is officially over you need to analyze the bridge load. It is known that several loads will be acting on the bridge. Therefore, you might have to analyze if the bridge could handle both the normal loads which are cause by the movement of vehicles and other form of loads which are caused due to the nature.
Finally the last piece to the puzzle is the testing aspect. Since the bridge is a high magnum project, you might want to make sure that the required testing is done before deployment. All in all, bridge construction is not easy task. It requires a massive workforce and loads of resources to successfully construct a bridge.

Posts created 44

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top